Auto Clock Setting Using Pdc Signal - Hitachi VT-FX950EUKN Instruction Manual

AUTO CLOCK SETTING USING PDC SIGNAL

Setting the clock using a PDC signal (Auto clock set)
This function engages when "AUTO clock
this function, specified "AUTO clock — (off)".
To switch auto clock between set on or off;
Controls
1
2
3
1 2 3
4 5 6
7 8 9
0
Notes:
• If the PDC signal being broadcast by a station does not contain a time signal, the VCR's clock will not be
set automatically by pre-tuning the VCR to the channel. In this case, use the procedure on page 19 to set
the clock manually.
• The time which has been set automatically may drift from the correct time depending on the signal
condition or the programme being broadcast. In this case, use the procedure on page 19 to set the VCR's
clock manually.
• If the VCR's clock has already been set manually, the function to set the clock using a PDC signal is
disabled automatically.
18
(on)" is specified on the VCR MODE setting screen. To release
TV Screen
1 2 AUTO 3
REV I EW CHANNEL
4 VCR 5
CLOCK
MODE
MENU =
=OSD
1
2 =AUTO BLUE
= AUTO
3
4 = N I CAM
5 = PROGRAM PLAY
=
6 PREPARE REC
3
MENU
MENU
4
Turn the VCR and TV on, then tune the TV to the
video programmer number.
Press the MENU button.
Exit
Press the button for VCR MODE.
4
Then press the
clock setting.
–
Exit
=
3 button to change the auto