Playback - Hitachi VT-FX950EUKN Instruction Manual

PLAYBACK

Controls
1
2
VCR/TV
TRACKING
PLAY
PAUSE
SLOW
1 2 3
4 5 6
7 8 9
0
F.ADV
22
VCR's Display
PLAY/STILL
/
Start point: Turn the TV set on and select the
video programme number.
Insert a cassette.
Note: When a cassette with its safety tab snapped
off is loaded, playback starts automatically.
Press the PLAY button on the remote control unit
or PLAY/STILL button on the VCR.
Press the VCR/TV button on the remote control.
The letter "VCR" will appear in the display. This is
necessary for viewing the picture through the
scart connection.
Note: When you press the PLAY button and a
cassette has not been inserted, the "
flash in the VCR display to warn you.
During playback you can use the following
features.
Pause playback
Press the PAUSE button on the remote control or
PLAY/STILL button on the VCR to stop the picture
on the screen during playback.
Press the button again to reset to normal
playback.
If the screen "jitters" vertically, this can be
improved by pressing the TRACKING
button.
Frame advance
Press the PAUSE button to still the picture.
Press the F. ADV button to advance the picture to
the next frame during still playback.
Pressing and holding the F. ADV button advances
the frames continuously.
Slow function
Press the SLOW button during playback.
Press the SLOW button on the remote control unit
during playback to view slow playback picture.
Press the SLOW or PLAY button again to reset to
normal playback.
Note: When the slow playback mode continues for
about 1 minute, the VCR switches to stop mode
automatically to prevent damage to the tape.
" will
/