Table of Contents
Advertisement
Special installation functions
You can select one of the following installation functions in
order to adapt the video recorder to your own specific
requirements.
Automatic TV channel search
The video recorder will search for all TV channels.
Note: If you want to start the automatic TV channel search
again, then follow the instructions below.
1
Switch on the TV set. If required, select the programme
number for the video recorder.
2
Press
on the remote control. 'CLK' will appear in
MENU
the video recorder display.
3
In the display, select 'AUTO' (Automatic TV channel
search) with
or
P- =
4
Press
. The 'Automatic TV channel search' starts.
OK
5
When the TV channel search is complete, 'OK' will
appear on the screen.
6
To end, press
.
MENU
How to search for a TV channel manually, you can read in the
section 'Manual TV channel search'.
Monitor function
You can switch backwards and forwards between TV picture
and video recorder picture with
when you use a scart cable to connect the video recorder to
your TV set and if your TV set responds to this switch-over.
You can also use
on the video recorder.
VCR/TV
.
;P+
. But this only works
VTR/TV
Sorting and clearing TV channels manually
You can assign any programme number to a TV channel that
you have stored and you can also delete unwanted TV
channels.
1
Switch on the TV set. If required, select the programme
number for the video recorder.
2
Press
on the remote control. 'CLK' will appear in
MENU
the video recorder display.
3
In the display, select 'ALLO' (Manual TV channel search)
with
or
.
P- =
;P+
4
Press
.
OK
5
With
or
, select TV channel to which you
P- =
;P+
want to give this the programme number, starting with
'P01'.
Note: If you want to delete a TV channel, press
6
Confirm with
.
SELECT
7
5
6
Repeat steps
to
number to all TV channels.
8
Confirm with
.
OK
9
To end, press
.
MENU
CH21
CLEAR (CL)
until you have given a programme
.
7
- Quick Links:
- Before You Call an Engineer
Hide quick links:
Advertisement
Table of Contents
