Special Characteristics; Linear Time Counter; Automatic Rewind; Rewind Shut Off - Hitachi VT-FX980EUKN Instruction Manual

SPECIAL CHARACTERISTICS

Linear time counter

1
VIDEO
1 ENTER TRANS 4
PLUS
2 1 2 3
4 5 6
DLY/WKL CL
7 8 9
0
PROG AUX
SP/LP EXTEND
3
VCR1/2/TV CLOCK
PDC CORRECT
MENU
0000
CLOCK
COUNT DISP 0000
CLOCK
CH1/2
V. DUB
A. DUB
COUNT

Automatic rewind

Rewind shut off

Mode lock function

VIDEO
ENTER TRANS
1 4
PLUS
2 1 2 3
4 5 6 6
DLY/WKL
CL
7 8 9 9
0
PROG AUX
SP/LP EXTEND
3
VCR1/2/TV CLOCK
PDC CORRECT
MENU
CLOCK
COUNT DISP 0000
CH1/2
V. DUB
A. DUB
VIDEO LINK
COMMERCIAL ADVANCE
PROG
CA
VIDEO LINK
Hour Minute Second
VIDEO LINK
COMMERCIAL ADVANCE
VIDEO LINK CA
S [ T OP ] 0 1
: – – –
1 2 0 5 0 1 SA 1 : 0 2 0 SP
/ /
Press the CLOCK/COUNT button to select the
linear time counter display. Every time the button
is pressed, it changes the VCR display between the
clock time display and time counter display.
• The counter is reset to 0:00:00 when a tape is
ejected.
• When the tape starts, it counts up from 0:00:00
and the counter indicates the elapsed time.
• Pressing the 0000 button resets the time counter
to "0:00:00".
Notes:
• The linear time counter does not operate when
nothing is recorded on the tape.
• The counter may not be able to count the time
precisely with some types of tape and at
particular positions of the tape.
The VCR automatically rewinds the tape when the
end of tape is reached.
To prevent accidental erasure, the VCR does not
rewind the tape after timer recording.
If the OPERATE button is pressed during the
rewind operation, the VCR will be turned off but
rewind operation will be continued until the tape
has been completely rewound.
Press the buttons
simultaneously on the remote control handset.
The VCR mode is now locked and "
in the VCR display and also "[
PRO
the TV screen.
When the VCR operating mode is locked, the VCR
accepts remote control commands but it will not
accept any commands from the buttons on the
VCR, except the jog and shuttle control.
To release the VCR lock, press the button
(CL) buttons simultaneously or press the
9
OPERATE button on the handset.
and (CL) buttons
6 9
" appears
]" is displayed on
6
and
55