Auto Install - Hitachi VT-FX950EUKN Instruction Manual

Auto Install

Auto Install (Plug & Play) function
This automatically tunes all broadcast channels, sets the clock and date.
To operate proceed as follows;
Plug the aerial lead into the VCR. Plug the aerial cable (supplied) from the VCR RF OUT into the TV
1
aerial input. Please refer to page 2.
VCR
2
3
(OPERATE)
4
5
TV screen
Connect to main power supply after completely
connecting all leads (as described on page 2:
Connection).
The VCR will be in standby mode at this stage and
the VCR display will show "– –:– –".
Press OPERATE button.
"
During this time, if your set-up include scart
connector and the TV is set to AV line, the TV
screen will display as shown.
AUTO
Exit
=
MENU
After this process is complete, the RF output
channel will appear in the VCR display.
For example, RF output channel 35.
Refer page 4, item 6 for further tuning.
Switch on your TV and select an unused
programme number. i.e. one not used for BBC1,
ITV, etc. (Please consult your TV instruction manual
as your TV may have a special VCR programme
number which must be used.)
Note: This programme number will be your VCR
programme from now on.
– 3 –
" will appear in the VCR display.