Hitachi VT-FX950EUKN Instruction Manual page 64

Video
6
7
8
9
Safety Tab
IMPORTANT:
Insert the cassette into the VCR. Push the cassette until the machine carries the cassette in itself.
Never force the cassette in as this may damage the mechanism.
TV screen
Press the PLAY/STILL button
Note: If the VCR display "
STOP button on the VCR or on the remote control.
The RF channel data will appear on the VCR
display. Press the PROG
the RF channel to "
output, press the STOP button on the VCR or on
the remote control again.
Tune your TV (consult your TV instruction manual)
until the test pattern shown appears.
The correct tuning position is when the picture is
clear. Ensure this programme is stored in your TV.
Press the PLAY/STILL button again, the test pattern
will disappear and the VCR will now come out of
the standby mode into the operate mode.
You should now be able to playback a prerecorded
cassette.
Insert the cassette as shown. If the safety tab is
removed then playback will start immediately. If not
press the PLAY/STILL button and the picture will
appear on the screen.
– 4 –
", press the
CH
/ button to change
". To stop the RF
CH