Table of Contents
Advertisement
Special installation functions
You can select one of the following installation functions in
order to adapt the video recorder to your own specific
requirements.
Automatic TV channel allocation
(Follow TV)
With this function, the video recorder stores the channels in
the same order as on the TV set. This only works if the video
recorder (socket
) and the TV set are connected
AV1 EXT1
with a scart cable.
Note: You must switch off any equipment connected to
socket
.
AV2 EXT2
1
Switch on the TV set. If required, select the programme
number for the video recorder.
2
Press
on the remote control. The main menu will
MENU
appear on the screen.
MENU
CLOCK
AUTO INSTALL
MANUAL SEARCH
FOLLOW TV
TV CHANNEL ALLOC.
RECORD SPEED
AUTO STANDBY
TV SYSTEM
SPECIAL SETTINGS
________________________________
...
†
Select the line 'FOLLOW TV' with
3
confirm with
. Take notice of the message on the TV
OK
screen.
4
Press
. 'TV01' will appear in the video recorder
OK
display.
5
Select programme number '1' on the TV set.
6
Confirm with
on the video recorder-remote control.
OK
The video recorder compares the TV channels on the TV
set and the video recorder.
When the video recorder finds the same TV channel as
the TV set, then it stores it at 'P01'.
OK
or
and
P- =
;P+
TV01
Note: When 'NOTV' (no signal from TV set) appears in the
display, the TV channels can not be allocated automatically.
In this case, read paragraph: 'Manual TV channel
allocation'.
7
Wait until e.g.: 'TV02' appears.
8
Select the next programme number, e.g.: '2' on the TV set.
9
Confirm with
on the video recorder-remote control.
OK
Note: If you have allocated the wrong TV channel, you can
go back one step with
CLEAR (CL)
0
7
9
Repeat steps
to
allocated.
A
To end, press
.
MENU
Automatic TV channel search (Autoinstall)
The video recorder will search for all TV channels. It stores TV
channels found in the following sequence: BBC 1, BBC 2, ITV,
CH 4, CH 5, SKY, others.
Note: If you want to start the automatic TV channel search
again, then follow the instructions below.
1
Switch on the TV set. If required, select the programme
number for the video recorder.
2
Press
on the remote control. The main menu will
MENU
appear.
Select the line 'AUTO INSTALL' with
3
4
Press
. The 'Automatic TV channel search' starts.
OK
AUTO INSTALL
SEARCHING
00 TV CHANNELS FOUND
ƒƒƒƒƒƒƒ__________________
PLEASE WAIT...
Wait until all TV channels have been found. This can take
several minutes.
.
until all TV channels have been
or
P- =
;P+
.
7
Hide quick links:
Advertisement
Table of Contents
