Connecting To Pc; Attach Cushion, Secure With Clamps And Fit Terminal Cover - Hitachi UT42MX70U User Manual

CONNECTION (continued)
2. Connect your External Equipment (if any) to the Unit (continued)

Connecting to PC

The PC connection terminal (D-sub 15 pin) + the PC (RGB)/DVI Analogue Audio Input terminal are connected
to the PC, allowing an analogue RGB signal.
[Example: 32 inch model]
How to connect from terminals on the Control panel (on the underside) to external equipment
To insert D-sub 15 pin, tilt the monitor forward and bring the terminals into view. 2 people are required to hold the
monitor and insert D-sub 15 pin safely. Be careful not to damage the panel.
* You may wish to leave an optional D-sub 15 pin extension cable connected to this terminal to make future
connections easier.

3. Attach Cushion, Secure with Clamps and Fit Terminal Cover

1
Attach the supplied cushion around the HDMI cable.
Cushion
(supplied
accessory)
2
Unfasten 2 clamps, and then connect the HDMI cable and power cord
to the monitor through open clamps.
HDMI cable
D-sub 15 pin
AUDIO
AUDIO
*
[Example: Connecting to PC]
HDMI cable
IN
or
*
[Example: 32 inch model]
Attach the cushion around
the HDMI cable so as not
to leave any clearance.
Clamp
Power cord
OUT [Example]
16