Installing The Touch Driver For Ms-Dos And Windows 3.1 - Elo TouchSystems Entuitive ET1X45C-4SWE-1 Series User Manual

Installing the Touch Driver for Windows XP, Windows
2000
For Windows 2000 and NT 4.0 you must have administrator access rights to install
Note:
the driver.
Insert the Elo CD-ROM in your computer's CD-ROM drive.
1
If the AutoStart feature for your CD-ROM drive is active, the system
automatically detects the CD and starts the setup program.
Follow the directions on the screen to complete the driver setup for your
2
version of Windows.
If the AutoStart feature is not active:
1 Click Start > Run.
Click the Browse button to locate the EloCd.exe program on the CD-ROM.
2
Click Open, then OK to run EloCd.exe.
3
Follow the directions on the screen to complete the driver setup for your
4
version of Windows.

Installing the Touch Driver for MS-DOS and Windows 3.1

You must have a DOS mouse driver (MOUSE.COM) installed for your mouse
if you wish to continue using your mouse along with your touchmonitor in
DOS.
To install Windows 3.x and MS-DOS from Windows 95/98, follow the
directions below:
Insert the Elo CD-ROM in your computer's CD-ROM drive.
1
From DOS, type d:\EloDos_W31 to change to the correct directory on the
2
CD-ROM (your CD-ROM drive may be mapped to a different drive letter).
Type install and press Enter to start the installation.
3
Align the touchscreen.
4
You must have already completed Steps 1 and 2 before proceeding. Refer to
Chapter 2 of the Elo DOS and Windows Driver Guide as necessary for
additional installation information.
To run the INSTALL program:
Type INSTALL at the DOS prompt in the directory containing the driver
1
install files.
1. To install Windows 2000 and Windows XP, you must use the "update driver" method; you will not
find a setup.exe file within the download.
1
, Me, 95/98 and NT 4.0
2-9