Touch Interface Connection - Elo TouchSystems 1524L Series User Manual

Touch Interface Connection

N : Before connecting the cables to your touchmonitor and PC, be sure that the computer
OTE
and touchmonitor are turned off.
Connect one end of the power cord to the monitor and the other end to the
1
outlet.
Connect one end of the video cable to the rear side of computer and the other
2
to the LCD monitor. Tighten by turning the two thumb screws clockwise to
ensure proper grounding.
Connect one end of either the touchscreen serial(RS232) cable or the touch
3
screen USB cable(but not both) to the rear side of the computer and the other
end to the LCD monitor. Tighten by turning the two thumb screws clockwise to
4
ensure proper grounding(optional module USB cable does not have thumb screws)
Press the power button on front panel to turn the monitor power on.
2
1 3 3
2-11