Touch Interface Connection - Elo TouchSystems 1938L User Manual

Touch Interface Connection

Before connecting the cables to your touchmonitor and PC, be sure that the computer
Note:
and touchmonitor are turned off.
1. Connect one end of the power adapter to the monitor and the other end to the connector of the
power cord.
2. Connect one end of either the touchscreen serial (RS232) cable or the touchscreen USB cable
(but not both) to the rear side of the computer and the other end to the LCD touchmonitor.
Tighten by turning the two thumb screws clockwise to ensure proper grounding (USB cable
does not have thumb screws).
3. Connect one end of the video/DVI cable to the rear side of computer and the other to the
LCD touchmonitor. Tighten by turning the two thumb screws clockwise to ensure proper
grounding.
4. Press the power button on the rear panel to turn the monitor power on.
5. Connect OSD remote control key (optional) to the monitor.
2-10 User Guide
1 2
3
3
Adapter Video Cable Serial Cable USB Cable
DVI Cable
2 5
OSD Remote Control Key
(option)