Touch Interface Connection; Msr Interface Connection(Optional) - Elo TouchSystems E700813 User Manual

Touch Interface Connection

Note:
Before connecting the cables to your touchmonitor and PC, be sure that the computer
and touchmonitor are turned off.
1. Connect one end of the power cord to the monitor and the other end to the AC outlet.
2. Connect one end of either the touchscreen serial(RS232) cable or the touch screen USB
3. Connect one end of the video cable to the rear side of computer and the other to the LCD
4. Press the power button on the front panel to turn the monitor power on.
Magnetic Stripe Reader(MSR) Interface Connection(optional)
If the MSR is installed on the monitor, plug the USB cable from the MSR directly to the PC. No
drivers are required to be loaded.
To change the MSR function mode from keyboard emulation to HID, load the "MSR CHANGE
MODE.EXE" utility from the enclosed TouchTools CD or go online to www.elotouch.com to
download this utility.
Note: MSR function mode can be changed to HID mode from keyboard emulation mode and
back using the "MSR CHANGE MODE.EXE" utility.
cable (but not both) to the rear side of the computer and the other end to the LCD monitor.
Tighten by turning the two thumb screws clockwise to ensure proper grounding(optional
module USB cable does not have thumb screws)
monitor. Tighten by turning the two thumb screws clockwise to ensure proper grounding.
2-11