OSD Control Options
Control
Brightness
Contrast
H-Position
V-Position
Phase
Clock
OSD H-Position
OSD V-Position
Color Balance
Auto-Adjust
Recall Defaults
OSD Language
Information
3-20
U s e r G u i d e
Description
Increases or decreases brightness
Increases or decreases contrast
Moves the screen left or right
Moves the screen up or down
Increases or decreases the snow noise of the image after auto
adjustment is made.
The dot clock is fine-adjusted after auto adjust.
Moves the OSD position horizontally on the screen. When the +
button is pressed, the OSD control menu will move to the right
side of the screen. Likewise, when the - button is pressed, the
OSD control menu will move to the left side.
Moves the OSD position vertically on the screen. When the +
button is pressed, the OSD control menu will move to the top side
of the screen. Likewise, when the - button is pressed, the OSD
control menu will move to the lower side.
Press + or - to select C1/9300, C2/6500 and USER. Only when
selecting USER can you make adjustments to the R/G/B content.
Press Enter to restore to factory default setting.
Press Auto to enable this function. The Auto-Adjust will
automatically adjust V-Position, H-Position, Clock and
Clock-Phase.
Returns the monitor to its default settings.
Select from English, French, Japanese, German and Spanish.
Indicates the current resolution, H-Frequency and V-Frequency.