Table of Contents
Advertisement
Installing the USB Touch Driver
Installing the USB Touch Driver for Windows XP,
Windows 2000, Me and 98
1 Insert the Elo CD-ROM in your computer's CD-ROM drive.
2 Choose Next. Select "Search for the best driver for your device (Recommended)" and choose
3 When a list of search locations is displayed, place a checkmark on "Specify a location" and use
4 Choose Next. Once the Elo TouchSystems USB touchscreen driver has been detected, choose
5 You will see several files being copied. Insert your Windows 98 CD if prompted. Choose Finish.
If Windows XP, Windows 2000,Windows 98, or Windows Me does not start the Add New Hardware
Wizard:
NOTE:
For Windows XP and Windows 2000 you must have administrator access rights to install
the driver.
1 Insert the Elo CD-ROM in your computer's CD-ROM drive.
2 Follow the directions on the screen to complete the driver setup for your version of Windows.
If the AutoStart feature is not active:
1 Click Start > Run.
2 Click the Browse button to locate the EloCd.exe program on the CD-ROM.
3 Click Open, then OK to run EloCd.exe.
4 Follow the directions on the screen to complete the driver setup for your version of Windows.
2-30 Elo Entuitive Touchmonitor User Guide
If Windows XP, Windows 2000,Windows 98, or Windows Me starts the Add New Hardware
Wizard:
Next.
Browse to select the \EloUSB directory on the Elo CD-ROM.
Next again.
If the AutoStart feature for your CD-ROM drive is active, the system automatically detects the
CD and starts the setup program.
Advertisement
Table of Contents
