Table of Contents
Advertisement
Specifications
Theory of Operation
The USB host initiates communication with the FDU01 using operation commands (Sensor LED On,
Fingerprint Capture Start and Stop). Fingerprint data are then captured by the CMOS sensor at a total
image size of 356 x 292 with 8-bit gray level. The image frame transfer speed is 500 bytes/ms. It
takes about 600 milliseconds to send one frame of image data over USB protocols.
FDU01 uses the SecuGen FOR (Fingerprint Optic Reader).
Sensor Specifications
Credit Card Reader
There is a serial credit card reader and a USB credit card reader.
The USB version is available in HID and Keyboard emulation versions. The reader reads all three
stripes on a standard credit card or drivers license. A green LED provides the operator with continu-
ous status of the reader operations.
Reference Standards-Conform to
applicable standards
Message Format
Card Speed
MTBF
1-4 Elo Entuitive Touchmonitor User Guide
Sensor
Image Capture Speed
Image Transfer Speed
Pixel Resolution
USB Signaling Type
Sensor
Resolution
Verifying Time
Image Capture Error Rate
Life Time Typically
SecuGen FOR
600ms / frame
500Byte / ms
356 x 292
Full Speed Type
CMOS Image Sensor
500dpi
< 1sec
< 0.1%
40,000Hrs
International Standards Organization, American National
Standards Institute, California Drivers License, American
Association of Motor Vehicle Administrators
ACCII
3 to 50 IPS
Electronics 125,000 hrs; Head 1,000,000 passes
Advertisement
Table of Contents
