Table of Contents
Advertisement
Installing the USB Touch Driver
Installing the USB Touch Driver for Windows 7, Windows Vista, Windows XP,
Windows 2000, ME and Windows 98.
1 Insert the Elo CD-ROM in your computer's CD-ROM drive.
2 Choose Next. Select "Search for the best driver for your device (Recommended)" and
3 When a list of search locations is displayed, place a checkmark on "Specify a location" and
4 Choose Next. Once the Elo USB touchscreen driver has been detected, choose Next again.
5 You will see several files being copied. Insert your Windows 98 cd if prompted. Choose
If Windows 98 or Windows 2000 does not start the Add New Hardware Wizard, do the
following:
NOTE: For Windows 2000 you must have administrator access rights to install the driver.
1 Insert the Elo CD-ROM in your computer's CD-ROM drive. If the AutoStart feature for your
2 Follow the directions on the screen to complete the driver setup for your version of
If the AutoStart feature is not active:
1 Click Start > Run.
2 Click the Browse button to locate the EloCd.exe program on the CD-ROM.
3 Click Open, then OK to run EloCd.exe.
4 Follow the directions on the screen to complete the driver setup for your version of
Installing APR USB Touch Driver for Windows XP and Windows VISTA
Insert the Elo APR CD-ROM in your computer's CD-ROM driver.
Follow the directions on the screen to complete the APR 3.1 driver setup for your version of
Windows. Do not plug USB cable until software is fully loaded. When finished, plug USB
cable and alignment data is transferred.
Note:
For the latest driver, go to elotouch.com and download it from the driver download section.
If Windows 98 or Windows 2000 starts the Add New Hardware Wizard, do the following:
choose Next.
use Browse to select the \EloUSB directory on the Elo CD-ROM.
Finish.
CD-ROM drive is active, the system automatically detects the CD and starts the setup
program.
Windows.
Windows.
2-10
Advertisement
Table of Contents
