Table of Contents
Advertisement
2. Click the Browse button to locate the EloCd.exe program on the
3. Click Open, then OK to run EloCd.exe.
4. Follow the directions on the screen to complete the driver setup
Installing the USB Touch Driver for
Windows 2000 and Windows 98
1. Insert the Elo CD-ROM in your computer's CD-ROM drive.
If Windows 98 or Windows 2000 starts the Add New Hardware Wizard:
2. Choose Next. Select "Search for the best driver for your device
3. When a list of search locations is displayed, place a checkmark
4. Choose Next. Once the Elo TouchSystems USB touchscreen
5. You will see several files being copied. Insert your Windows 98
If Windows 98 or Windows 2000 does not start the Add New Hardware
Wizard:
Note: For Windows 2000 you must have administrator access rights to
install the driver.
1. Insert the Elo CD-ROM in your computer's CD-ROM drive.
If the AutoStart feature for your CD-ROM drive is active, the system
automatically detects the CD and starts the setup program.
2. Follow the directions on the screen to complete the driver setup
If the AutoStart feature is not active:
1. Click Start > Run.
Elo Entuitive Touchmonitor
CD-ROM.
for your version of Windows.
(Recommended)" and choose Next.
on "Specify a location" and use Browse to select the \EloUSB
directory on the Elo CD-ROM.
driver has been detected, choose Next again.
CD if prompted. Choose Finish.
for your version of Windows.
Installing the Driver Software
CRT Desktop User Guide - 11
Advertisement
Table of Contents
