Optimizing The Lcd Display; Installing The Peripheral Device Drivers; Finger Print Reader - Elo TouchSystems 1229L(WWW) User Manual

Optimizing the LCD Display

To ensure the LCD display works well with your computer, configure the display mode of your
graphic card to make it less than or equal to 800 x 600 resolution, and make sure the timing of the
display mode is compatible with the LCD display. Refer to Appendix A for more information about
resolution. Compatible video modes for your touchmonitor are listed in Appendix C.

Installing the Peripheral Device Drivers

Finger Print Reader

NOTE: This driver is for MS Windows 9x through XP.
1 On the TouchTools CD, browse to Touch Monitor Peripherals\Finger
2 Double-click setup.exe
Follow the Install Shield Wizard procedure to complete the installation.
For a detailed software development kit, browse to Touch Monitor
Peripherals\Finger Print Readers and open the following files:
You will need to enter the serial number specific to your operating system. The serial number can be
found in the ET1229L User Guide on the Touch Tools CDs.
Once the driver setup is complete, the demo program can be run from Touch
Monitor Peripherals\Finger Print Readers\FPR Demo\BSPDemo.exe
2-24 Elo Entuitive Touchmonitor User Guide
Print Readers\driver\EasyInstall\FDP02.
• FDxSDKforWindows1 .20.zip
• SecuBSPSDK for Windows2 .10.zip