EPSON Stylus Photo
1.8.2 C206 PSB/PSE(Power Supply) Board
The C206 PSB/PSE board is a switching regulator type power supply unit and constantly supplies stable
logic and power voltages to the printer mechanism and the main control board. Also, since this C206
PSB/PSE board has the power switch in the secondly side of the circuit, it is possible to keep supplying
electricity to the C209 MAIN control board for 30 seconds even after the power switch is turned off. Using
this time difference, even when mis-operation is done by the user such as turning off the power during the
middle of printing work, it prevents unexpected trouble with the printhead from occurring, by transferring
the printhead to the cap position before complete shut down. The C206 PSB Board is for AC100 - 120V
input voltage and the C206 PSE Board is for AC220-240V input voltage.
Figure 1-13. C206 PSB Board
1.8.3 C209PNL Panel Unit
Panel unit (C209 PNL board) consists of 3 switches, 4 LEDs and 1 connector as they are illustrated in the
figure below.
Figure 1-14. C209 PNL Panel Unit
1.8.4 Printer Mechanism
This printer mechanism consists of ASF(auto sheet feeder) mechanism, paper load mechanism,
carriage mechanism, print head, pump mechanism and waste ink absorber.
1-27
Rev.A