Preparation For Adjustment - Epson Stylus Photo Service Manual

4.2.2.2 Preparation for Adjustment

Before you start adjustment, have the following items ready for adjustment.

PC (MS-DOS Machine)

I/F cable (Parallel)

Brand new ink cartridges (Black and Color)

Photo quality ink jet paper (#S041061/2)

Printer that is necessary to adjust (At least, the printer mechanism, electrical
circuits, boards and panel should be connected.)

Make sure to use the new ink cartridge, which is not used and also not opened before.

Use the special ink-jet paper in order to check the adjustment result accurately.
1. Connect the PC to the printer and turn the PC and the printer on. Then, unpack a brand-new ink
cartridges and install them on to the printer.
2. Load "GWBASIC.EXE" and execute the adjustment program "K00A10VE".
3. At the menu [SCREEN-1], input "2" to select "Cartridge" and press ENTER key.
4. Then, at the menu [SCREEN-2], input the number corresponding to your market and press ENTER
key.
[SCREEN-1] ***** TOOL ***** PM-700C/STYLUS COLOR PHOTO K00A10Ve
Input ITEM No. : ?_
[SCREEN-2] ***** CUSTOMER ***** PM-700C/ STYLUS COLOR PHOTO K00A10Ve
Input ITEM No. :?__
[SCREEN-3] <MAIN MENU for Production> STYLUS COLOR PHOTO K00A10Ve
Input ITEM No. :?_
Rev. A
CAUTION
1. Jig
2. Cartridge
1. 000: (WORLD)
2. 100: (JAPAN)
3. 000: (KOREA)
4. 000: (RUSSIA)
1: VH Setting
2: Ink Charge
3: Angular Adjust Printing
K: Angular Adjust Setting
4: Bi-d Adjust
P: Print Inspection (GOS)
L: Print Inspection (S/F)
M: Print Inspection (Post-card)
CL. Cleaning:
9. INK Discharge
E. END / Go to SETTING MENU
Chapter 4 Adjustment
XX-XX-XXXX XX:XX:XX
CUSTOMER:WORLD
Jig No. :CT
M/C No. :
HEAD VH :
4-5