Environmental Condition - Epson Stylus Photo Service Manual

Chapter 1 Product Description

1.2.5 Environmental Condition

Temperature

Operating

Non-operating
Note) 1 month at 40 C and 120 hours at 60 C


Humidity

Operating

Non-operating


Resistance to shock

Operating

Non-operating


Resistance to vibration

Operating

Non-operating
Note 1) During non-operating, make sure that the head is capped.
Note 2)
During the transport, make sure that the head is capped and ink cartridge is
installed to the printer.
Note 3) If the head is not capped at the power-off state, turn the power on with installed ink
cartridge and turn off the power after confirming that Power on operation is completed and
the head is capped.
Note 4)
Ink will be frozen under -4 C environment, however it will be useable after placing it
more than 3 hours at 25 C.
1-8
:10 to 35 C (Refer to the figure below for condition)
: -20 to 60 C (with shipment container)
: 20 - 80% RH (without condensation. Refer to the figure below for
condition)
: 5 - 85% RH (without condensation and with shipment container)
Figure 1-5. Temperature/Humidity of
Range
: 1G, within 1 ms X,Y,Z directions
: 2G, within 2 ms X,Y,Z directions (with shipment container)
: 0.15G, 10 - 55Hz X,Y,Z directions
: 0.50G, 10 - 55Hz X,Y,Z directions (with shipment container)
Rev.A