Receiving Data From Tr-151 Via Gprs Network - Globalsat TR-151A User Manual

4.3.2 Receiving data from TR-151 via GPRS network

In order to receive report from TR-151 by TR Management Center, there is some setting should
be made.
Step 1: Activate GPRS service
Please set the GPRS port. (You can refer to 4.2.1.3 to set GPRS port.) After setting GPRS port,
please activate GPRS server
To activate the GPRS service, please click the "Start" button at GPRS Service. After activating
the GPRS service, the GPRS service status will be shown as the right screen below.
->
Step 2: Send command to connect TR-151 or wait TR-151 to connect to TR Management center
automatically.
Please refer 4.2.1.1 and check what the default report mode you set for TR-151 is. If the default
report mode of TR-151 is "GPRS immediate report" or "GPRS period report", TR-151 will
automatically connect to TR Management center after it is powered on every time.
If the default report mode is "SMS immediate report" or "SMS period report" or "stop", it requires
TR Management to send SMS by Skype to TR-151 to make GPRS connection with the TR
Management center.
Please select the TR-151 under Tracker list and right click the mouse to bring out the menu as
below..
Please select "Connect Tracker (Skype)" to ask TR-151 to make GPRS immediate report to TR
Management center.
Step 3: When TR-151 is making GPRS connection with TR Management center, you will see
TR-151 show the status on the tracker list as the screen below.
TR-151 page 52