Device Operation; Device Charging - Globalsat LT-20P Series User Manual

4. Device Operation

4.1 Device Charging

Using the device for the first time, rechargeable battery will require the proper charge
before LT-20/LT-20P is operable. To maximize your device's battery life, proceed by
performing the steps listed below.
1. Connect cradle to AC power adapter via micro USB cable.
2. Put LT-20/LT-20P to the charging cradle and red LED would be on while charging.
3. It should be charged at least 1.5 hours of battery charging time.
If you don't purchase charging cradle, you could put our device which solar panel face to
proper sunshine to charge. It will take several days to be charged to at least 50% for the
proper operation.
Notice:
1. Please note the device will be charging by solar panel only when it's on.
2. When it is in standby mode, it could not join to network server and send any
report.
7