Asf Unit Removal; Pe Sensor Removal - Epson Stylus 820 Service Manual

Stylus Color IIs / Stylus 820

3.2.6.2 ASF Unit Removal

1. Remove the printer mechanism (see Section 3.2.5).
2. Press down the tab on the left side; then pull the ASF unit toward you.
3. Press the tab on the right side; then remove the ASF unit.
When you remove the ASF, be extremely careful of the PE sensor. Pull the top of the ASF unit
toward the front of the mechanism to clear the PE sensor.

3.2.6.3 PE Sensor Removal

1. Remove the printer mechanism (see Section 3.2.5).
2. Remove the ASF unit (see Section 3.2.6.2).
3. Disconnect CN7 on the C160 MAIN Board, then remove the PE sensor.
Rev. A
CAUTION
1
2
PE Sensor Actuator
Figure 3-11. ASF Unit Removal
Figure 3-12. PE Sensor Remopval
Disassembly and Assembly
ASF Unit
ASF Unit
CAUTION
PE Sensor Actuator
1-Screw
1
3-9