Epson Stylus 820 Service Manual page 9

Stylus Color IIs / Stylus 820
1.1 FEATURES
The Stylus Color IIs printer is a color ink jet dot matrix printer that comes with a 64-nozzle black printhead
and a 60-nozzle CMY color printhead, either of which can be installed in the printer. The Stylus 820 version
of the same printer comes standard with only the 64-nozzle black printhead; however, the CMY color
printhead can be purchased as an optional upgrade. Whenever this manual mentions the Stylus Color IIs, its
descriptions are equally applicable to the Stylus 820. The major printer features are:
High-quality color print
-720 dpi printing
-720 dpi printing on plain paper
-720, 360 dpi printing on special coated paper
(Use the monochrome head only with plain paper)
High-speed print
-LQ 125 cps (monochrome head)
-LQ 170 cps (CMY head, using one-pass printing)
Note: The CMY head prints 360 dpi printing in three passes.
Built-in auto sheet feeder
-Plain paper (Can be installed up to the hopper guide marker.)
-Transparency film (Can be installed up to the hopper guide marker.)
-Glossy paper (1-sheet only)
-Coated paper (Can be installed up to the hopper guide marker.)
-Envelopes (30 sheets)
-Postcards (30 sheets)
Built-in I/F
-Parallel I/F only (8-bit parallel: IEEE P1284 mode)
Easy setup
-No DIP switches
3 scalable fonts and 3 LQ fonts standard
-Roman T, Sans Serif H, Roman, Sans Serif (scalable)
-Roman, Sans Serif, Courier, Prestige, Script (LQ, bitmap)
Character tables
-9 character tables (standard version)
-15 character tables (NLSP version)
Low running cost
The figure below shows the Stylus Color IIs.
Figure 1-1. Exterior Viewing of Stylus Color IIs(820)
Rev. A
Product Description
1-1