M-4C10 Printer Mechanism Removal - Epson Stylus 820 Service Manual
Terminal printer
Hide thumbs
Also See for Stylus 820:
- Service manual (146 pages) ,
- Printer basics manual (81 pages) ,
- Product information (11 pages)
Table of Contents
Advertisement
Disassembly and Assembly
3.2.5 M-4C10 Printer Mechanism Removal
1.
Remove the upper case (see Section 3.2.1).
2.
Remove the C160 MAIN Board (see Section 3.2.2).
3.
Remove the C160 I/F Board (see Section 3.2.3).
4.
Remove the C160 power supply board (see Section 3.2.4).
5.
Remove 4 CBB (M4x11) screws securing the printer mechanism to the lower case.
When you replace the printer mechanism, perform the required adjustments. (See Chapter 4.)
CBB(M3x11)
3-6
CAUTION
CBB(M3x11)
Figure 3-7. Printer Mechanism Removal
Stylus Color IIs / Stylus 820
CBB(M3x11)
M-4C10 Printer Mechanism
CBB(M3x11)
Rev. A
Advertisement
Chapters
Table of Contents
