Removing The Motor Assy.,Cr - Epson LX-300 Service Manual

3.2.4.2 Removing the MOTOR ASSY.,CR

1. Remove the Printer Mechanism (see Section 3.2.4).
2. Remove the BELT TENSION SPRING from the hook on the MOTOR ASSY.,CR and the hook
on the FRAME, BASE.
3. Remove the TIMING BELT from the PULLEY DRIVE.
4. Remove the E-ring, PULLEY WASHER, BELT PULLEY FLANGE, and PULLEY DRIVE
MOTOR ASSY.,CR.
the
5. Rotate the MOTOR ASSY.,CR counterclockwise and remove it.
Figure 3-10. Removing the MOTOR ASSY.,CR
PULLEY WASHER
i
BELT PULLEY FLANGE
: /
MOTOR ASSY.,CR
FRAME, RIGHT
BELT TENSION SPRING
from
3-11