Removing The Detector,Hp; Removing The Release Lever Position Sensor - Epson LX-300 Service Manual

Disassembly and Assembly

Removing the DETECTOR,HP

3.2.4.5
Remove the printer mechanism (see Section 3.2.4).
1.
2. Release the 2 clips attaching the DETECTOR,HI' and remove it. The clips can be accessed
through holes in the FRAME,BASE; to release the clips, push each with a pair of tweezers.
2
Figure 3-14. Removing the DETECTOR,HP

3.2.4.6 Removing the Release Lever Position Sensor

1. Remove the MOTOR ASSY.lF(See Wion3.2.4.1).
2. Release the 2 clips that attach the release lever position sensor to the frame of the MOTOR
3. Remove the release lever position sensor from the frame of the MOTOR ASSY.,PF.
Figure 3-15. Removing the Release Lever Position Sensor
3-14
Frame of the
Release Lever
MOTOR ASSY.,PF position Sensor
LX-3(IQ Service Manual
Clip