Removing The Printer Mechanism - Epson LX-300 Service Manual

3.2.4 Removing the Printer Mechanism

1. Remove the COVER ASSY.,PRINTER, EDGE GUIDE ASSY., ribbon cartridge, TRACT'OR
2. Remove the HOUSING ASSY.,UPPER (see Section 3.2.2).
3. Remove the connectors and FFCS from the BOARD ASSY.,MAIN.
4. Remove the3 SHAFT,HOUSING,LOWER (1018296).
5. Remove the SHAFT,HOUSING,LOWER (1015457). Note that this
three described in the previous step.
6 Remove the printer mechanism.
LOWER (1015457) s
Figure 3-8. Removing the Printer Mechanism
shaft is different from the
LOWER(1018296)
Printer Mechanism
3-9