Warning Message - Epson ActionLaser 1600 EPL-5600 Service Manual

I
REMOVE CART
RAM ERROR
(Note)
I
SERVICE REQ.
This printer displayed "RAM ERROR 1" or "RAM ERROR 2". If "RAM ERROR 1" is
Note:
displayed, the problem is caused by the SIMM inserted in socket mnnector CN8. If
"RAM ERROR 2" is displayed, the problem is caused by the SIMM inserted in socket
1.4.4.3

Warning Message

If any of the following warnings occurs, it will be displayed on the LCD panel.
'. ..-
M e s s a g e
CHECK PAPER SIZE
IMAGE OPTIMUM
Rev. A
Table 1-15. Emor Messages (Cont.)
status
Cartridge was insetted while Form Fed
light was on or the printer was on line.
Either the SIMM is damaged or it is not
supported.
Printer problem.
Table 1-16. Warning Messages
status
The paper in the selected tray is
different ftom the mr)er size chosen
when SIZE IGNORE = OFF setting.
Because of insufficient memory, the
printer uses a lower print quality.
General
I
Remove cartridge and press
CONTINUE button.
Power off and then remove
SIMM.
button.
CONTINUE
Service required.
Measures
Press the CONTINUE button.
Press the CONTINUE button.
1-27