Eeprom Format - Epson ActionLaser 1600 EPL-5600 Service Manual

1.4.3.3 Factory Service Mode
The
factory service mode is a useful tool fir service people. This mode is not available to users. To
enter factory semice mode, turn on the printer while holding down the ON LINE and CONTINUE
buttons until "PRODUCT MENU" is displayed. The factory service settings are shown in
Table 1-13.
Menu
PRODUCT
VERSION
* With option
Note 1: This counter value is Ieftof toner weight (pgrams) in imagingcartridge.

EEPROM Format

1.4.3.4
EEPROM format operations are required only when the Video Ccmtroller Board (C125 MAIN
board) or EEPROM is replaced and these operations are specified in the accompanying
documentation.
EEPROM format functions (printer mme, default paper size (A4 or letter), toner counter, page
counter, jam counter, and panel settings) are all stored in memory.
Defaults for the EEPROM format functions can be written to EEPROM as follows:
Turn on the printer while holding down the ITEM, ?, and CONTINUE buttons until
"FORMAT=EPL5600" is displayed.
Turn on the printer while holding down the MENU, ALT, and FORM FEED buttons until
Rev. A
Table 1-13. Factory Service Mode
NAME
CODE ROM
FONT ROM
LL ROM
(Local Language ROM)*
PS ROM (EPSONScript
Module ROM)*
General Desor@ion
Available Options
by T or 4 button)
(Set yENTERbutton)
1
I
I
(jam counter clear)
I
(displayed version)
1-25