Operating Instructions; Control Panel - Epson ActionLaser 1600 EPL-5600 Service Manual

1.4 OPERATING INSTRUCTIONS

This section desaibes the functions performed through the control panel, such as test print,
hexadecimal dump, and SelecType functions.

1.4.1 Control Panel

The printer control panel gives you easy control over most common printer operations. 'Me panel
consists of a liquid aystal display (LCD), indicator lights, and buttons.
Display (LCD)
A 20-character (5 x 7 dot matrix) by l-row liquid crystal display (LCD) unit that indicates printer
status. A variety of printer parameters can be displayed and set using SelecType mode.
Indicator lights
On Line
ON:
---
OFF:
Flashing:
Form Feed
This LED indicates the data processing condition for each interface channel: S, P, and O.
ON:
OFF:
Flashing:
when
Flashes
on the display at the same time.
Rev. A
Menu
. . . . . . . . . .
Figure 1-9. Control Panel
Communication with the host is possible.
Communication with the host is not currently possible.
This state occurs when the system cannot shift from off line to on line, or vice
versa.
Received data is stored in the printer but has not been printed.
There is no printable data remaining in the printer.
The printer is processing data.
error is detected or a maintenance procedure is needed. An error message appears
an
Item On Line
. . . . . . . . . . . . .
General Lhwctiption
1-19