Control Panel Removal - Epson ActionLaser 1600 EPL-5600 Service Manual

3.2.1.2 LocalTalk Module (C6232@ I/F Board) Removal
1. Remove the video controller board (C125 MAIN board). (Refer to Section 3.2.1.1.)
3. Remove the LocalTalk module from thevideocontmller board (C125 MAIN board).
Figure 3-5. Removing the 2 Screws

3.2.1.3 Control Panel Removal

1.
Open the top cover. Remove the imaging cartridge. Cover the imaging mrtridge to protect it
from light or place it in a dark area.
2.
Remove 1 CC screw (M3 x 8) from the control panel.
Lift the control panel, and then remove comector CN3 on the engine controller board
3.
Remove the control panel.
4.
"..
./7-
from the LodTalk module.
2 CP screws (M3 x5)
CP (M3 5)
X
Removing the Controi Panei
3-7.
Figure 3-6. Refi:;~~: the LocalTalk
CC (M3 8)
X