MECHANICAL DIMENSIONS
The meters are provided with a black anodized
aluminum body, front and back panels in
shockproof ABS plastic and a transparent
splash-proof front cover.
Front view of the panel-mounted unit
69mm
2.71"
72mm
2.83"
The dimensions show the cutout size for the
installation.
Side view of the panel-mounted unit
0.25/4mm
0.01/0.160"
144mm
5.67"
Adjustable location brackets (supplied with
the meter) allow the indicator to slide into the
cutout and will hold the unit securely in place.
190 mm (7.50") is the minimum space re-
quired to install the indicator with complete
wiring.
141mm
144mm
5.55"
5.67"
ADJUSTABLE
LOCATION
BRACKET
135mm
5.31"
190mm MIN
7.50"
6
Keypad
SENSOR TEST
To display the mV reading of the electrode and,
therefore, verify its working condition
pH 7 TEST
To verify the internal circuit of the meter in terms
of Offset compensation
pH 4 TEST
To verify the amplifier circuit of the meter
Trimmers
Δ Δ Δ Δ Δ O
SLOPE For Slope calibration
6£
FUNCTIONAL DESCRIPTION HI 8510
FRONT PANEL
pH
HI 8510E
pH
SENSOR
TEST
pH 7
pH 4
TEST
TEST
For Offset calibration
7
SLOPE
Δ