Route Search - Eclipse AVN2454 Owner's Manual

Navigation guidance
2. Set a destination and search for a route
•If a destination is already set, touch
Replace
to delete the set destination and
set a new one.
•Touch Add
"Adding a destination" on P75,

Route search

Set a destination and a route search will automatically start.
•A route search will continue even if switching to other screens.
•The route will not appear if the distance to the destination is too short.
•When a route search is complete, an all-route display (all routes from the present location
to the destination) screen will appear.
•If the destination is on a freeway or in an
inaccessible area, the following screen will
ATTENTION
appear. Touch the item corresponding to
the situation.
•Touch
•Touch
•If the destination is inaccessible or if there is
a river, railroad or other obstruction in its
vicinity, the following screen may be
displayed.
•Touch
•Touch
•If a route search is conducted on a freeway or toll road interchange (IC), the
search result route may start from a nearby local road. In such a case,
reinitiate a route search (see P95).
66
to add a destination. (See
5
Yes
to set the destination on the highway.
No
to set the destination on another road.
No to set that point as the destination.
Yes to move the destination.
6
to )