Switching The Map Reduction Scale; Switching To The Desired Reduction Scale - Eclipse AVN2454 Owner's Manual

Basic operation
3. Map displays

Switching the map reduction scale

The map reduction scale (map range) can be switched to any desired setting from
40,960,000:1 to 2,500:1. Also, if the destination is set, you can switch to the reduction scale
showing the entire route to the next destination with one touch.
Touch switch
To widen the map's range, touch
1
To shrink it down, touch
•Every time the touch switch is touched,
the scale goes up/down one level at a
time.
•After having touched
number on the scale bar to switch to the
reduction scale represented by that
number.
•Touch continuously on
least 1 second to switch the scale with no
increments (free zoom).
•The reduction scale switched to will be
indicated with a yellow mark (
•The
scale diagram).
ATTENTION
•For safety reasons, the scale cannot be free zoomed while driving.
30
Reduction scale Scale display
150ft
1/0.005 million
300ft
1/0.01 million
700ft
1/0.02 million
0.25mi
1/0.04 million
0.5mi
1/0.08 million
1mi
1/0.16 million
2mi
1/0.32 million

Switching to the desired reduction scale

or , touch a
or
).
switch will disappear when setting to the maximum range (250 mile
Touch switch
Scale bar
for at
Reduction scale Scale display
4mi
1/0.64 million
8mi
1/1.28 million
16mi
1/2.56 million
30mi
1/5.12 million
60mi
1/10.24 million
130mi
1/20.48 million
250mi
1/40.96 million