Eclipse AVN2454 Owner's Manual page 17

6 Vehicle position mark
The present location and the vehicle direction are displayed.
7 Scale display
The reduction scale of the map being displayed is indicated.
The length of the
8 GPS mark
This mark will appear when utilizing the absolute positioning data from the GPS satellite.
•See the next page for information concerning this mark's display. There may be
misalignments depending on the satellite conditions.
9 Distance remaining display
The distance from the present location to the destination is indicated.
•While route guidance is in progress, the distance calculated from the route now being
taken to the destination is indicated.
•When deviating from the set route, the distance to the destination in a straight line is
indicated.
•See P93 for information on how to switch the remaining distance display.
: Required time display/destination direction mark
The following marks appear depending on the situation.
Required time display
While route guidance is in progress, the required time up to the destination is indicated.
•See P86 for information concerning the required time.
Destination direction mark
When deviating from the set route, the direction towards the destination is displayed.
A Cursor mark
This mark is indicated on the map retrieved by a search or by scrolling.
To scroll, simply touch the map (on a spot other than the touch switches on the screen).
B Cursor position name display
The name of the cursor position on the map is displayed (approx. 6 seconds).
Except for some parts describing certain functions, this manual uses normal
north-up map screen illustrations to describe the device's functions.
"Map touched" appears signifying that the map was directly touched (on spots
other than touch switches).
appearing in the screen above represents 150ft.
15