Back Monitor Image; Displaying The Rear Image - Eclipse AVN2454 Owner's Manual

Optional function
1. Back monitor function

Back monitor image

1
Touch CAMERA SCREEN
•The rear image appears on the monitor screen.
CAMERA SCREEN
•Touch
•The range of the image may vary depending on the vehicle and the road
conditions.
ATTENTION
•There is a limit to the range of the camera. Objects near the ends of the bumper
and under the bumper cannot appear.
•The rear image color may vary from the actual objects.
•The image brightness and contrast can be adjusted. (See P20, "Adjusting the
screen")
•Depending on the vehicle, the back guideline may appear misaligned on the left
and right. This is not a malfunction.
•In the following situations, the screen may be difficult to view but does not
constitute a malfunction.
•In a dark area (such as at night)
•The temperature near the camera is high or low
•Raindrops are on the camera lens or the humidity is high (when raining)
•A foreign object is near the camera (such as mud)
•When the sun or a beam from headlights strikes the camera lens directly
•When a high-luminance point strikes the camera (such as the reflection of the
sun's rays on the chassis), a Smear effect* typical of CCD cameras may occur.
<Screen condition>
128

Displaying the rear image

on the INFORMATION screen.
again to return to the normal screen.
*Smear effect: A phenomenon
where a vertical line appears from
a high-luminance point striking
the camera (such as the reflection
of the sun's rays on the chassis).
High-luminance point