Remote Ui - Canon IMAGERUNNER 2016 Reference Manual

Remote UI

You can set whether to enable the Remote UI (User Interface) to operate the
machine and change settings.
The imageRUNNER 2020/2016 comes standard equipped with a direct Ethernet
connection interface. Once the Ethernet interface port is configured properly, the
imageRUNNER 2020/2016 can be controlled and set up through the Remote UI
and network. You can also use the Remote UI to fax from your computer using the
Ethernet connection.
NOTE
•
For more information on the Remote UI, see the Remote UI Guide.
•
For instructions on configuring the Ethernet port, see the Network Guide.
•
The default setting is 'ON'.
6
1
Additional
Functions
2
OK
3
OK
6-26

Remote UI

Press [Additional Functions].
ADD. FUNCTIONS
1.COMMON SETTINGS
The Additional Functions menu appears.
Press [ ] or [
press [OK].
If the System Manager ID and System Password have been set, enter the System
Manager ID and System Password using the numeric keys ➞ press
ADD. FUNCTIONS
9.SYSTEM SETTINGS
The <SYSTEM SETTINGS> menu appears.
Press [ ] or [
press [OK].
SYSTEM SETTINGS
7.REMOTE UI
The <REMOTE UI> menu appears.
] until <SYSTEM SETTINGS> appears ➞
SYSTEM SETTINGS
1.SYS. MANAGER INFO
] until <REMOTE UI> appears ➞
REMOTE UI
(ID).
ID
ON