System Password - Canon IMAGERUNNER 2016 Reference Manual

6
Stop

System Password

Follow the procedure below to set the System Password.
1
Additional
Functions
OK
6
2
OK
3
OK
6-4 Specifying the System Manager Settings
NOTE
If you make a mistake when entering a number, press
entire number ➞ enter the correct number.
Press [Stop] to return to the Standby display.
Press [Additional Functions] ➞ [
<SYSTEM SETTINGS> appears ➞ press [OK].
If necessary, see the screen shots in steps 1 and 2 of "System Manager ID," on p.
6-2.
If the System Manager ID and System Password have been set, enter the System
Manager ID and System Password using the numeric keys ➞ press
The <SYSTEM SETTINGS> menu appears.
Press [ ] or [
➞ press [OK].
If necessary, see the screen shots in step 3 of "System Manager ID," on p. 6-2.
The <SYSTEM MANAGER INFO> menu appears.
Press [ ] or [
➞ press [OK].
SYS. MANAGER INFO

2.SYSTEM PASSWORD

The <SYSTEM PASSWORD> menu appears.
] or [
] until <SYS. MANAGER INFO> appears
] until <SYSTEM PASSWORD> appears
SYSTEM PASSWORD
(Clear) to clear the
C
] until
(ID).
ID
0000000