Adjusting the Print Density
You can adjust the density scale if differences between the image on the original
and the print occur.
NOTE
The default setting is in the middle '5', on a scale of 1 to 9.
1
Additional
Functions
OK
2
5
OK
3
OK
4
Stop
5-22
Specifying Common Settings
Press [Additional Functions] ➞ [
<COMMON SETTINGS> appears ➞ press [OK].
If necessary, see the screen shots in steps 1 and 2 of "Initial Function at Power
ON," on p. 5-15.
The <COMMON SETTINGS> menu appears.
Press [
] or [
press [OK].
COMMON SETTINGS
5.PRINTER DENSITY
The <PRINTER DENSITY> menu appears.
Press [
] or [
dark (DK+) ➞ press [OK].
PRINTER DENSITY
-LT
The Printer Density is adjusted.
Press [Stop] to return to the Standby display.
] or [
] until <PRINTER DENSITY> appears ➞
PRINTER DENSITY
-LT
] to adjust the density from light (-LT) to
COMMON SETTINGS
DK+
6.AUTO DRAWER SELCT
] until
DK+