Panasonic AGHPX255 Operating Instructions Manual page 83

Playing back a clip at the position
where a text memo is recorded
1
Turn the POWER/MODE switch to set to PB/
THUMBNAIL mode.
The thumbnail screen appears on the LCD
monitor.
2
Press the MENU button and select
THUMBNAIL → TEXT MEMO CLIPS from
the thumbnail menu.
The clip thumbnails with text memos attached
are displayed in the upper section of the LCD
monitor. The lower section of the LCD monitor
shows information about the text memo on the
clip selected by the pointer.
Thumbnail
Shows the still image that the
Display
text memo is related to.
Selected text memo clips
(blue) and total clips (white)
3
Move the pointer over the clip that contains
the desired text memo to playback and
press the SET button on Operation lever.
The pointer moves to the lower part of the LCD
monitor.
The pointer moves down.
4
With the pointer at the bottom, push the
Operation lever in the ◄ ► direction and
position it on the text memo number you
wish to play back then push the Operation
lever in the ▲ direction (► playback).
• Playback will start from the time code
position of the text memo where the pointer
is located. If the Operation lever in the 
direction (STOP) is pressed during playback
or the playback has finished at the end of
the clip, then the thumbnail screen appears
again with the pointer replaced with the text
memo where the playback started.
• Press the MENU button to select EXIT or
press the EXIT button to return the pointer to
the upper part of the thumbnail screen.
• Pressing the START/STOP button in the
text memo screen will not start recording.
• For AVC-Intra format clips that cannot be
played back, text memo thumbnails cannot
be displayed, and may be shown as a
icon.
Deleting a text memo
1
Select the desired text memo by carrying
out steps 1–3 for "Playing back a clip at the
position where a text memo is recorded"
(Left).
2
Move the pointer to the desired text
memo, and then press the SET button on
Operation lever.
3
Press the MENU button to select
OPERATION → DELETE from the thumbnail
menu.
A YES/NO screen appears to confirm that you
wish to delete. Select YES with the Operation
lever to delete the text memo.
83