Panasonic AGHPX255 Operating Instructions Manual page 59

To title a file
1 Perform steps 1 to 5.
2 Set the filename with 8 characters by using
Operation lever.
• ▲ ▼: Character shift
◄ ►: Character selection
SET: Character fix
• Characters that can be set
space (□) → alphabet (A to Z)
→ numerics (0 to 9)
→ symbols (; : < = > ? @ [ \ ] ^_-./)
• If the RESET button is pressed when the
filename has been set, the characters are
cleared.
BARS SHUTTER SPEES SELECT
CH1 SELECT CH2 SELECT INPUT1 INPUT2
INT(L) INT(R) ON ON
INPUT1 INPUT2
OFF OFF
INPUT2
MIC POWER+48V
AUDIO
REC
COUNTER RESET/TC SET ZEBRA OIS
LCD EVF DTL WFM
3 After input is complete, at the left end of the
characters push the Operation lever in the ◄
direction (or in the ► direction from the right
end of the characters) to select YES and press
SET.
• If WRITE NG FORMAT ERROR appears,
format the SD memory card. (Page 16)
• If WRITE NG WRITE PROTECT appears,
change the lock tab position to enable writing.
• If WRITE NG CANNOT ACCESS appears, quit
all other operations (such as playback) before
proceeding.
• If WRITE NG ERROR appears, the SD
memory card may be defective. Replace it.
START/
DATE/ PHOTO
STOP
OSD TIME SHOT
COUNTER RESET TITLE
ZOOM
MULTI/
REC A.DUB
P-IN-P
/REW PLAY FF/
59