Panasonic AGHPX255 Operating Instructions Manual page 108

Connections to the DVCPRO/DV connector (continued)
• Observe the following precautions when
controlling a P2 memory card camera-recorder
using PC application software (editing software).
· Recording cannot be inserted to a portion within
a clip. It can only be appended to the end of the
newest clip.
· Do not open the thumbnail screen during
application software operation as this may
prevent normal software operation.
• Unprocessed video and audio signals are
output via the IEEE1394 interface during special
playback. When monitored on another device,
these video and audio signals may sound
different than when played back on this unit.
• A DV or DVCPRO output format makes it
possible to select audio channel CH1/CH2 or
CH3/CH4 output from the IEEE1394 interface in
the menu option 1394 AUDIO OUT in the AUDIO
SETUP screen.
• When recording a signal from an external device,
do not halt output at the external device or
disconnect the cable as the device may not be
recognized when recording is recommenced.
• When recording a signal from an external device,
do not change the output format used by the
external device as recording cannot be correctly
performed.
• The automatic recording function on DVD devices
may not function correctly. In such cases, please
record manually.
108