Panasonic AGHPX255 Operating Instructions Manual page 124

Screen displays (continued)
26 Optical Image Stabilizer display
This is displayed when the OIS button is
pressed and Optical Image Stabilizer is
activated.
27 Scene file name display
Indicates the name of currently selected
SCENE FILE (F1 to F6).
28 Remaining battery charge
As the remaining battery charge drops, the
display changes as follows:
→ →
When the battery is completely discharged,
( ) blinks.
(When the AC adaptor is being used, a display
other than
of malfunctioning.)
• Remaining battery capacity may not be
displayed correctly with use at high or low
temperatures, or when the battery has
not been used for a long period of time.
To ensure that remaining battery capacity
is displayed correctly, use the battery
completely from a fully-charged state, and
charge the battery again. (Remaining battery
capacity may still not be displayed correctly if
the battery has been used for long periods at
high or low temperatures, or if the battery has
been recharged a large number of times.)
• The remaining battery capacity display is
a guideline and may change according to
usage conditions.
29 Digital zoom display
This displays the digital zoom ratio.
D2x: 2x
D5x: 5x
D10x: 10x
30 One-clip recording mode display
1-CLIP:
Indicates that recording has started for a
new clip in one-clip recording mode.
1 CLIP:
Indicates that recordings can be compiled to
a previous clip in one-clip recording mode.
124
→
.
may appear: this is not a sign
31 Media remaining memory display
• Set the menu option P2CARD REMAIN in
the DISPLAY SETUP screen to ONE-CARD
to display the remaining time on the P2 card
being recorded and show the number of the
slot it resides in on the left.
TOTAL displays the remaining time on both
cards.
• Note that in a mode check (MODE CHK),
ONE-CARD and TOTAL are displayed
→
alternately.
• This display does not appear while remaining
memory is calculated and when the camera-
recorder is in USB device mode.
• A mode check (MODE CHK) during loop
recording displays the standard recording
time available to loop recording.
• Indicates remaining time in 1-minute
increments from 0 to 999 minutes. 999
minutes and longer time periods are also
indicated as 999 minutes.
• The display blinks when 2 minutes or less
time is left.
32 Media information display
Indicates the slots that contain P2 cards and
general information on the media.
lights: P2 card ready for recording
1
lights green:
1
P2 card selected for recording
flashes: The card is being recognized
1
: No card inserted
-
: Write-protected
P
: Full
F
: Cannot recognize
X
: P 2 card in an invalid format (formatting
E
will take care of this problem)