Display Setup Screen - Panasonic AGHPX255 Operating Instructions Manual

DISPLAY SETUP screen

Item
EVF PEAK Adjusts the peaking level of the viewfinder and the LCD
LEVEL
monitor.
– 7...0...+ 7
EVF PEAK FREQ Adjusts the peaking frequency of the viewfinder and the
LCD monitor.
HIGH, LOW
EVF SETTING Adjusts viewfinder brightness and contrast on a
subscreen.
(Subscreen)
EVF BRIGHTNESS
EVF CONTRAST
EVF B. LIGHT Adjusts viewfinder backlight brightness.
HIGH, NORMAL, LOW
EVF COLOR Selects whether the viewfinder image will be displayed in
color or monochrome.
ON:
Color display
OFF:
Monochrome display
EVF MODE Sets viewfinder off automacally or not when the LCD
monitor is opened.
AUTO:
Switches off automatically.
ON:
The viewfinder operates constantly.
However, this is limited to when SDI OUT is set to OFF.
"SDI OUT" (Page 145)
ZEBRA1 DETECT Sets the level of the right-leaning zebra pattern 1.
50%...70%...109%
ZEBRA2 DETECT Sets the level of the left-leaning zebra pattern 2.
50%...85%...109%
ZEBRA2 Selects ZEBRA2 type. (Page 35)
ON, SPOT, OFF
MARKER Turns center marker displayed in the viewfinder and
on the LCD monitor on and off. (Page 36)
ON, OFF
___indicates the factory setting.
Setting Notes
147