Nonlinear editing with P2 card (PC mode: USB device) (continued)
• When a USB connection is present the PC
operation lamp illuminates, and "USB DEVICE
CONNECT" appears in the center of the
viewfinder or LCD monitor. When connection is
not correctly, "DISCONNECT" appears in the
viewfinder.
Mode lamp (PC)
POWER/MODE switch
(Viewfinder display)
USB DEVICE
CONNECT
5
Terminating USB device mode.
• Set the camera-recorder POWER/MODE
switch to OFF.
• You cannot return to CAMERA mode or PB/
THUMBNAIL mode from USB device mode.
110