Exiting From The Configuration Utility - HP Kayak XA-s 02xx Manual

Scan for Device at Boot
Time
Scan for SCSI LUNS
Queue Tags
Format Disk
Verify Disk Media
HP Kayak XA-s 02xx PC Workstation - Configuring a SCSI Accessory
Using the SCSI Configuration Utility (Selected Models)
This option lets you specify whether the device is scanned for at boot
time. The choices are Yes or No.
More advanced SCSI devices can have several logical units (LUNs). This
option lets you specify whether SCSI LUNs are scanned for at boot time.
The choices are Yes or No.
This option lets you specify whether queue tags are enabled or disabled.
In a multi-tasking environment this option must be enabled. It should
only be disabled for troubleshooting.
This utility can be used to perform a low-level format of a hard disk.
Most SCSI disks are pre-formatted and do not need low-level formatting.
This utility scans for media defects on the selected SCSI device. Press
the key to abort this utility.

Exiting from the Configuration Utility

To exit from the Configuration utility, press
of times to return to the Main menu, and then press
10 English
the necessary number
to quit.