Interrupting Copying And Making Other Copies - Oki CX4545 MFP Copying Manual

2 HOW TO MAKE COPIES
 Interrupting copying and making other copies
You can interrupt the copy job in progress to make other copies (interrupt copying). When restarting the interrupted job,
you do not have to reselect copy modes that have been set because they are memorized in this equipment.
 The following functions cannot be used together with interrupt copying:
Cover sheet copying, Sheet insertion copying, Job build, Store to e-Filing, Copy & File
 During interrupt copying, the mode cannot be changed to a non-copying one, such as e-Filing, scanning, printing or
fax. To change the mode, first press the [INTERRUPT] button to clear the interrupt copying.
1
Press the [INTERRUPT] button on the control panel.
"Job interrupted job 1 saved" appears and then the [INTERRUPT]
button lights.
If the original is being scanned, the message above appears after
the scanning has finished.
2
Replace the original with a new one.
3
Select other copy modes as required and then press the [START] button on the control
panel.
4
Press the [INTERRUPT] button again after the interrupt copying has finished.
"Ready to resume job 1" appears and the interrupted job restarts.
32 Making Copies