Manual Staple Mode - Oki CX4545 MFP Copying Manual

3.BASIC COPY MODES
 Manual staple mode
You can staple copied paper manually without any copying operation. This is useful when you have forgotten to set the
staple sort mode before starting copying, or when you want to staple originals. (Available only with the Finisher MJ-1101 or
Saddle Stitch Finisher MJ-1106)
Maximum number of sheets available for manual stapling
Paper size
A4, B5, LT
A3, A4-R, B4, FOLIO, LD,
LG, LT-R, COMP
Use the buttons on the stapling control section of the Finisher (optional) for manual stapling.
Stapling position
button / lamps
1
Press the stapling button on the stapling control section.
The shutter of the paper exit area is opened and this equipment enters into the manual staple mode.
2
Press the stapling position switching button to switch the staple position (front or
rear).
3
Place paper on the lower receiving tray of the Finisher
(optional).
Fan and jog the paper well. Place it with its face down.
When you staple them at their corner on the front side, place the
sheets of paper aligned to the front side. When you staple them on the
rear side, place the sheets of paper aligned to the rear side.
The stapling lamp lights when the paper is properly placed. If it
does not light, replace the paper.
4
Let go of the paper, and then press the stapling button.
Stapling starts. When the stapling position switching lamps start blinking, it means the stapling has finished. Then
remove the stapled paper.
Be sure that your hands are away from the paper while stapling is in progress.
Finishing the manual staple mode
Remove the stapled paper from the lower receiving tray, and then press the stapling button. The shutter of the
paper exit area closes. This means that manual stapling is finished. If no operation is performed for approx. 15
seconds, the manual staple mode will be automatically finished.
Paper weight
2
64 - 80 g/m 81 - 90 g/m
(17 - 20 lb. Bond) (21 - 24 lb. Bond)
MJ-1101: 30 sheets
50 sheets
MJ-1106: 50 sheets
30 sheets MJ-1101: 15 sheets
MJ-1106: 30 sheets
Stapling
button / lamp
3 BASIC COPY MODES
2 2
91 - 105 g/m
(25 - 28 lb. Bond)
30 sheets
15 sheets
Selecting Finishing Mode 77